Labels:text | sketch | black and white OCR: RECTIFIER END BEARING 15SI SERIES USE THIN WALL TUBE IN SPACE BETWEEN 20. PUSH SLIP RING END BEARING OUT FROM OUTSIDE TOWARD INSIDE OF END FRAME. GREASE CUP AND 21. ON 10SI AND 12SI, PLACE FLAT PLATE HOUSING TO PUSH BEARING IN FLUSH OVER NEW BEARING, PRESS FROM OUTSIDE WITH HOUSING TOWARD INSIDE UNTIL BEARING IS FLUSH WITH END FRAME. 22. ON 15SI, SEE ILLUSTRATION. 23. ASSEMBLE BRUSH HOLDER, REGULATOR. RESISTOR, DIODE TRIO, RECTIFIER BRIDGE AND STATOR TO SLIP RING END FRAME. 24. ASSEMBLE END FRAMES TOGETHER PARTIAL VIEW RECTIFIER END FRAME WITH THRU-BOLTS. REMOVE BRUSH RETAINER WIRE. 15SI/100
(.png)
